Gadgetory

alright so I just recently purchased the Clifford matrix plus one alarm it's the one that comes with a little key table like this cancion that says clifford the installation was fairly easy at myself I'm I'm fairly experienced I've done sound systems and stuff that's all the experience I have doing a electrical wiring and cars basically you have your sense that are up here that I have melted behind my rear view mirror rounded cables up along the top down the side right here by the kick panel and then I mounted my head unit if the brains of the operation right here you can see we can adjust it to be more sensitive or not all the cables the hardest part of the whole project was just getting the right cables to match up the ignition has a few wires that you connect to and I connected to the door lights down inside of here right next to this push pin so that's some where you can connect I got all my the wiring schematics on line as far as the alarm itself goes I haven't mounted it completely yet I had that kind of zip tied in there and then the cables come up and down and then through the firewall right there and this isn't a toyota tacoma so it's gonna be different in every vehicle as far as how it sounds if you press it once it locks it and you have the unlock gives the two beeps the alarms and ones like this and just continues on I'm just pressing the button once so the high-pitched whining just keeps going and going and going if the alarm goes off but that's the installation for the Clifford collar alarm system it is kind of cool though with this light inside of here that flashes blue just like that when the make car alarm is set so it kind of lights up the whole cab at night which is kind of cool anyway the only questions assessed you