Gadgetory

anyway so take off this rear tire you have this metal clip cap this washer right here and then you have another sorry that's not right here and there another washer inside of this wheel and we're going to have to break loose in just a second and as far as the exhaust goes with my bike before I can slide the tire off I need to replace or need to remove on the exhaust pipes so I'm going to do this nut here and then this allen bolt here in this animal here I've already taken those off so now this should be loose enough to slip off of the exhaust so we've worked with this bad way back together when I take some grease and kind of get some grease on this back axle just kind of put a thin layer all the way around it not too thick because a lot of it will scrape off when I put the tire on anyway so now we're going to take this right here and stick it on first in this guy we're going to tighten it down all the way now we got to get it on far enough so that is tight and holds the wheel straight and then we also have to be able to put on this cotter pin all the way through so it sticks is oh yeah so this little pin there's a little hole right inside of there that this needs to attach onto it goes thread through anyway it's on there so I'll put a listen on the video description of everything that you need to do this like the The Stand the ratchet size for this the video the tires tires are really cheap in the video in the on Amazon so I'll post a link for those in view of the back tire in place the exhaust back on me everything's good to go anyway if you have any questions make sure to leave them in the comments don't forget to subscribe and like if this video helped you thanks for watching you