Gadgetory

so I'm underneath a Jeep Grand Cherokee it's a 95 the flywheel isn't moving very smoothly and so I've kind of rigged up a contraption to help I will rotate hopefully this will help help someone else out in the future with the flywheel you have to get the torque converter bolts in so I have one but as you can see the other bolt is way too far up in there is the one at the very top of the screen so what I've done is I've taken a one of these tie-downs and I wrapped around this front arm right here coming down and then grabbing up where it connects with the tire here you can see the where it clicks in and then I have a bolt sticking out of one of the holes in there but as you can see as I pull on this it rotates the flywheel obviously you don't want to do this you know it's not your first method of attack just because it might cause damage in the future but it does rotate the flywheel even as you need to rotate it you can pull out you can loosen up the tie-down remove the bolt and keep on rotating so that bolt up there I need to put in it's just about in place so thanks to that little handy contraption I can now get this bolt in so yeah we're good another way of writing the flex plate is taking a wrench that's smaller in diameter than the thickness of your flex plate and putting it up in there so it attaches on one of the grooves and the flex plate itself and then if you push up it's still pretty difficult but if you push up you can rotate the flex plate as you can see right there names down rotate up so that's one way to do