Gadgetory

so after I did my unboxing of the MIB t 3140 I thought you know what I've actually got a monitor sitting around that would be perfect to just install on it so that we can actually see what it looks like so this is a older Easter 19-inch widescreen monitor not particularly exceptional in any way but it's perfect for something like this now another thing I didn't show is the hardware included with the MIB series case so here give me two seconds here I'm just going to put this down so really dusty you okay so then you've got some hard drive screws those are included and then you've also got all the screws that you need to install the mother stole the motherboard install the monitor onto the case so here let me just check what the orientation of this is going to be want to make sure okay there's a little clip on the back and show you this really quick see this so you just pull this aside and push down and then the arm extends and then for this one gee I don't actually know how to unlock this one I did the cameraman with the song here cuz I bet you did it wrong cameraman always does things wrong oh no it's just really stiff oh there we go okay so there that's oh okay cool that's much better now okay so I just want to check the orientation of this thing once I've got it on to make sure that I'm putting it on the right way so that I can actually get the screws through and Fred them into something I guess it goes yeah my guess is that it goes this way and then must go on like this or maybe it goes on through it like this ah there we go can you tell I've never done this before ok so first thing we'll do is find the appropriate screws which I believe are these ones and then we will Oh don't worry i found it it's all good and I even have tools to get checked out and so will screw this in to the back of the monitor so yeah we got those holes lined up like nobody's business i'm just going to put in two so that you're not just sitting around waiting for me to install screws to follow up the conclusion of the video so we'll just do that guy and then we'll do the top right one I think that'll be enough to hold this monitor it's actually rated for up to 22 inches this is arms are so this is only a 19 inch monitor so this is only going to be a small amount of the capabilities of this little system here so oh wow here we go so I want you to be able to see this from the back so I'll slide the monitor on go just like that no kind of like that that's on point there we go and then you take these two big screws and put those in from the back and that is how long it takes to install the monitor onto this case takes like six screws assuming you're doing it correctly although I used only for and then just like that so now that I've actually got a monitor on it it's much easier to move around because it's got its got quite a bit of uh quite a bit of stiffness to it so that when you have a monitor on you have all this leverage it doesn't move too easily so there you go so you set this up just like that you got your keyboard and mouse and there's your complete pc so thank you for checking out my how to install a monitor guide for the mi BTW 3140 so we showed the vertical adjustment as well as the tilt adjustment but wait there's more