Gadgetory


All Cool Mind-blowing Gadgets You Love in One Place

We Built an RTX 2070 and 6 Core RYZEN Gaming PC for only $1050...!

2018-12-05
- So, recently, PC parts have come down to the point now where they're just such good value for money here before Christmas in 2018. And today here we have on the desk, a PC for someone that wants it all but doesn't wanna spend it all. It's gonna have a Ryzen 5 2600 6 core, it's gonna have an RTX 2070, decent power supply, hard drive, SSD, and a case with some bling to match. So let's take a look at all these parts, and then of course put this build together, and see how it performs. (upbeat music) So going over the list of components going in this build, first up we have the Ryzen 5 2600 coming in at $169, if you're in Australia, $212 on sale. This is a 6 core, 12 thread processor, the latest from AMD. It's also overclockable, and comes with an included CPU cooler that runs really well. Next up is DDR4 memory. You can currently get this for $109 for a 16 gigabyte kit. If you're in Australia, $164. Then we're going on to the case. That's the Deepcool Matrexx 55. In the U.S. you can get it for $38 but it doesn't have any included RGB fans. So we're adding an additional three RGB fas to put at the front for $26. In Australia this will cost you $69 AUD. And it comes with the three fans included. Moving on to storage you can currently get 120 gigabyte SSDs for as little as $23 in America and in Australia $28. 120 gigabytes will be plenty enough for using this as a boot drive and if we need more storage then we have a one terabyte hard drive going for $45, in Australia $62. And for a power supply, now we've got some different choices here. I'm using a 550 Watt in my build today, but if you're in America you can get a 600 watt going for just over $50, and in Australia 800 watt going for $82 on sale currently. Also for a motherboard to couple with your CPU, you may wish to consider a B450 which can currently be had for $75, and in Australia you can get an X370 motherboard which is Ryzen 2000 series ready, which is what we're using in the build today for $87 AUD shipped. And now onto the last ingredient and that is the most important for a gaming PC, and that is the graphics card. Here we have the Auris RTX 2070, but if you're looking to save some money you can currently pick them up for as little as $500 or in Australia $748 AUD on sale. And of course, couldn't forget the white LED strip for a dollar shipped to your door. But what are we waiting for? Let's build this beast. (deep bass music) So we're just finishing off this build now, and there's one thing that's really a little bit weird about the build and that is, it's a budget case but they've got three fan headers here, and they're all four pin, and so if you're most likely buying a budget case you're probably gonna couple with a budget motherboard which doesn't have that many fan header outs, so, you'd definitely wanna get yourself one of these. I would've liked to have seen Deepcool maybe include a three to one, 3, 4 pin to one Molex connector, just to save anyone hassle, but definitely add this to the build if you're gonna use this case with a budget orientated motherboard. (deep bass music) So we've just finished building in the Matrexx 55 and I will give it some props to how easy it was to build in this thing. Very spacious at the back, no sharp edges so you won't risk cutting yourself, and the airflow at the front isn't too bad for three pre-included fans. Keep in mind however, I do think the airflow kinda feels a little bit awkward, it doesn't feel like it's doing a proper push-pull through the front, but we'll talk a little bit more about this case and the build itself after we tune this CPU and also the memory. So if you're getting something similar to this, then you can get the best performance for your dollar, and then we'll also test some games. (upbeat electronic music) So now we've finished tuning everything and benchmarking and the results are so impressive. Not only just for the budget itself, but I think the aesthetics of the build kinda look good, keep in mind it's missing a tempered glass side panel. That's because it shattered in shipping, but because its a review sample I still wanted to take a look at the case anyway, which we'll talk about later. But here we've got the Ryzen 5 2600. It's overclocked to 4 gigahertz with the Wraith Stealth cooler, and its performing so well. Also with the RTX 2070 we've overclocked that and we just got really good performance all round. 1440p ultra settings, is absolutely no problems for this combination. If you wanna drop it down the higher settings of course, we'll get even more FPS, and when it came to Battlefield 5, we were playing some Team Deathmatch I was getting over 100 FPS at 1440p with maxed out settings. We didn't bother turning on RTX just yet because the performance here is just too much. Maybe after some more optimization it will run better. But we move over to Call of Duty Black Ops 4, that was a phenomenal experience too, multiplayer was absolutely no problems for this rig yet again at 1440p ultra settings. And when we move over to Monster Hunter World. Again it's not really optimized for PC, but it still ran really well, it's a smooth experience. So what you've got here is something that not only represents phenomenal value for money in more of the high end gaming scene, but also something that looks pretty decent as well. We've got three RGB fans at the front, got an LED strip in there as well as a Wraith fan at the back. Now, this build would have looked better had I not received the case minus the tempered glass side panel, if you guys didn't know what happened I'll put the link up here. Essentially before I even opened the case it was just shattered, and because it's a review sample and was sent over from Taiwan, it's just too much of a time wasting and money wasting exercise for Deepcool to send us another one, so I thought I'd do the review even though the build would've looked better with that tampered glass panel, of course, especially to disperse that white LED strip just hanging there. But in terms of the budget memory too, we got that up to 2800 megahertz in dual channel on this motherboard. It was seal 18 timings, and that's not the best, but its by far no the worst either, so if you can get this memory on a budget, you can get it to decent speeds of course. If you want a bit more performance you can go for 3200 megahertz, seal 14 XMP timing memory, but that will set you back a little bit more money, so that upgrade is up to you if you wish to go with it, depends on how long you wanna keep this for. If you wanna mix and match some parts, I'd probably go with the upgrade to the better memory but if you're on a budget and you wanna keep things strictly budget, then the budget memory if you've got a bit of time to tune it, it's definitely a decent option too. But also if you're in the market to build a new PC, then I think now is a really good time, DDR4 memories come down in price, crypto boom is over so graphics cards have come down a lot in price and so those combinations together as well as the fact that SSDs are so cheap and X370 motherboards or B450 motherboards as well as the Ryzen 52600s, they're all cheap. It's just a great time to be building a new PC again as opposed to in the past, especially in 2018, I haven't built many new PCs at all, because of that crypto boom, graphics cards were overpriced, so building a lot more used PCs. Then we had the DDR4 memory price hikes which really value builds so hard do. But coming up now before Christmas, it's just great value for money, at just over $1000, this build screams price performance. And then also if you're in Australia, the pricing really isn't that bad at all, it's similar to US pricing when we look at triple p terms, so you're not gonna be getting ripped off, and it's certainly nothing to be mad about either. But now it's time to talk about the Deepcool Matrexx 55. And after building in this thing I can honestly say I'm pretty impressed with it for the money, I mean there's a few little quirks of course, the shipping box that it comes in definitely could use an upgrade as mine was shattered in shipping, and the box didn't look like it was banged up that bad either. They were using pretty good tempered glass from what I could tell, but you get three RGB fans at the front if you get the RGB version, which in Australia it's $69 AUD, is definitely good value for money. It comes with pre-installed standoffs as well, which I do like because it saves me time if I'm building PCs, and also inside there was no sharp edges, everything was quite roomy to work with as well. You had two drive bays, I would say that I'd like to see more drive bays but I think the average person is only gonna use two drives on a budget case. In terms of room for cable management, there was plenty of that, dust filters were good, and the fans at the front they were okay, I guess for the price range. The RGB effects were very limited, I'd like to see the choice at least to change between all the different static colors build into the controller, and I'd also critique the Deepcool to say please include a Molex to three fan splitter because a lot of people buying this case are probably buying a budget motherboard, and not having something like that there could be very frustrating if you can't get all your fans plugged up. But with some of those negatives aside, I can't help but like the Matrexx 55 for the money, I think this is definitely gonna be for someone who wants to get a good value for money case, or it's a special for someone who wants to flip medium to high end PCs but still have something that looks good, and of course has a decent airflow. Even though the fans themselves weren't the best and they're by far not anywhere near the best, they're much better than some of those options that just have three really weak fans in the front. So will do a decent job, especially with a build like this, that only puts out around 330 watts, you're not gonna have a problem at all, but keep in mind, I couldn't test that properly because we don't have a side glass panel to put over it, but when inside the games the CPU and GPU temperatures are pretty good. And also another thing to keep in mind is, it's 28 degrees ambient where I'm at, at the moment, and also I did overclock the CPU and the GPU quite aggressively, and everything still held up while we were playing games. Anyway guys I hope you enjoyed today's build. If you did then be sure to hit that like button and let us know in the comments section below what you think of the value 1k build. Love reading your thoughts and opinions as always, and of course, that Ryzen 5 2600, I'm gonna be making a separate video about it, because Intel just really don't have anything like the i5 8400 for sale at the moment, so that's pretty much leaving free reign for Ryzen in terms of new price performance builds, with this Ryzen 5, 6 cores. Absolutely phenomenal value for money, I'm sort of waiting on Intel to release the i5 9400, but they're not doing that. So in the meantime, you've got no competition, AMD has got free reign, absolutely phenomenal value for money. And I'll catch you in another tech video very soon. Peace out for now. Bye. (upbeat electronic music)
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.