Gadgetory

Benj dog kid offers a variety of support options to complement your grid driven workbench and the bench dogs come in four heights designed to provide solid support while staying well below the surface of normal dimensions when you need a wider clamping area just drop an extended stop over a pair of dogs now you have a 7-inch bearing surface plus if you have a complicated assembly that needs offset support to keep from falling over the 1/8 inch bench dogs are threaded to receive adjustable risers woodpeckers deluxe bench dog kit comes in two versions one with 20 millimeters stems for Festool MFT and similar systems and the other with 3/4 inch stems the Box bench dogs face frames give you the convenience of three tools in one they work to draw the face frames together side to side help to align the frames across the front face and provide a steel guide bushing so you can pre-drill and screw your face frames together while they're still being held by the clamps the clamp body and side jaw are cast steel for durability and strength they feature legs on the back side to allow the pressure plate to align the face frames front to back and the guide bushing snaps conveniently out of the way for driving the screw once the face frames have been pre-drilled these clamps are simple and effective engage the legs of the side jaws against the back of the face frames and tighten the side jaws drawing the two cabinets together before final tightening the center pressure plate is used to align the cabinet's face to face and this is the time to align the cabinet's top to bottom as well once the cabinets are fully aligned tighten the side jaws the guide bushing is automatically in position for drilling the pilot holes then it snaps out of the way leaving plenty of room to drive the screw you